9 material differences · fewer than 12
Tractor oneFendt 240 S1987–1993No measured PTO figureTractor twoNew Holland 32351996–1999No measured PTO figure
Which should you choose?
Read our verdict on the 240 S and the 3235 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 240 S | 3235 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 39.3 hp | 38.5 hp | — |
| Engine declared | KHD F3L 912 | IVECO 8035.06 | differs |
| Displacement declared | 2.83 L | 2.71 L | — |
| Maximum torque declared | 121 lb·ft · 164 N·m | 99 lb·ft · 134 N·m | +22% 240 S |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry OMG or LuK double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | — | 9.2 gpm · 35.0 L/min | — |
| Pressure declared | — | 3,263 psi · 225 bar | — |
| Rear PTO speeds declared | 540/750 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,038 lb · 2,285 kg | 3,792 lb · 1,720 kg | +33% 240 S |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 80.7 in · 2,050 mm | 78.7 in · 1,999 mm | — |
| Length declared | 139.2 in · 3,535 mm | 128.0 in · 3,250 mm | +9% 240 S |
| Width declared | 65.9 in · 1,675 mm | 64.6–84.3 in · 1,640–2,140 mm | differs |
| Ground clearance declared | 13.9 in · 353 mm | 14.8 in · 375 mm | +6% 3235 |
| Turning radius, braked declared | — | 10.1 ft · 3.07 m | — |
| Fuel tank declared | 63.4 qt · 60 L | 44.4 qt · 42.0 L | +43% 240 S |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 240 S sources
Source
- Source: Traktorenlexikon, “Fendt Farmer 240 S”
- Source: Traktorenlexikon, “Deutz D 4006 P”
New Holland 3235 sources
Source
- Source: Traktorenlexikon, “New Holland 3235”
- Source: Traktorenlexikon, “New Holland 3435”