10 material differences · fewer than 12
Tractor oneFendt 209 VA/VA-breit2002–2009No measured PTO figureTractor twoNew Holland TN 95 DA2006–2007No measured PTO figure
Which should you choose?
Read our verdict on the 209 VA/VA-breit and the TN 95 DA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 209 VA/VA-breit | TN 95 DA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 89 hp | 89 hp | — |
| Maximum torque declared | 250 lb·ft · 339 N·m | 268 lb·ft · 364 N·m | +7% TN 95 DA |
| Transmission | |||
| Top speed declared | 21.7 mph · 35 km/h | 24.9 mph · 40 km/h | +14% TN 95 DA |
| Clutch declared | dry multi-plate clutch | Oil-immersed multi-plate clutch with six plates of 113 mm diameter | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Constant flow | differs |
| Pump flow declared | 19.5 gpm · 74.0 L/min | 12.5 gpm · 47.4 L/min | +56% 209 VA/VA-breit |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540/750/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,611 lb · 2,545 kg | 6,724 lb · 3,050 kg | +20% TN 95 DA |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 83.8 in · 2,128 mm | 86.0 in · 2,185 mm | — |
| Length declared | 139.8 in · 3,550 mm | 140.5 in · 3,568 mm | — |
| Width declared | 45.5–47.0 in · 1,155–1,193 mm | 79.1 in · 2,010 mm | differs |
| Ground clearance declared | 8.7 in · 220 mm | 14.2 in · 360 mm | +64% TN 95 DA |
| Fuel tank declared | 74.0 qt · 70 L | 93.0 qt · 88 L | +26% TN 95 DA |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 209 VA/VA-breit sources
- Source: Traktorenlexikon, “Fendt Farmer 209 VA”
New Holland TN 95 DA sources
- Source: Traktorenlexikon, “New Holland TN95 DA”
- Source: OECD test report 2346, 2006