Fendt 209 FA or New Holland TN 95 DA?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 209 FA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TN 95 DA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Fendt 209 FA suits loader and hydraulic implement work better on this data: 56% (26.6 L/min / 7.0 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 209 FA | TN 95 DA | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 66 kW (89 hp)Traktorenlexikon, “Fendt Farmer 209 FA” | 66 kW (89 hp)Traktorenlexikon, “New Holland TN95 DA” | Not comparableNot comparable on power at the PTO shaft: the 209 FA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TN 95 DA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 209 FA and the TN 95 DA. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 209 FA and the TN 95 DA. |
| Which pumps more oil for implements? | 74.0 L/min (19.5 gpm)Traktorenlexikon, “Fendt Farmer 209 FA” | 47.4 L/min (12.5 gpm)Traktorenlexikon, “New Holland TN95 DA” | AheadThe Fendt 209 FA has 56% more hydraulic flow (26.6 L/min / 7.0 gpm) than the New Holland TN 95 DA (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,694 kg (5,939 lb)Traktorenlexikon, “Fendt Farmer 209 FA” | — | No figureNo call on three-point lift: no figure on record for the TN 95 DA. |
| Which is heavier, for traction? | 2,760 kg (6,085 lb)Traktorenlexikon, “Fendt Farmer 209 FA” | 3,050 kg (6,724 lb)Traktorenlexikon, “New Holland TN95 DA” | Ahead (a fact, not an advantage)The New Holland TN 95 DA is 11% heavier (290 kg / 639 lb) than the Fendt 209 FA (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 4,000 kg (8,818 lb)Traktorenlexikon, “Fendt Farmer 209 FA” | — | No figureNo call on maximum permissible mass: no figure on record for the TN 95 DA. |
| Which has the wider choice of gears? | 21Traktorenlexikon, “Fendt Farmer 209 FA” | 12Traktorenlexikon, “New Holland TN95 DA” | AheadThe Fendt 209 FA has 75% more forward gears (9 gears) than the New Holland TN 95 DA (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 209 FA and the TN 95 DA. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Fendt Farmer 209 FA” | 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TN95 DA” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/750/1000 rpmTraktorenlexikon, “Fendt Farmer 209 FA” | 540/1000 rpmOECD test report 2346, 2006 | AheadThe Fendt 209 FA offers 750 rpm at the PTO, which the New Holland TN 95 DA does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland TN95 DA” | No figureNo call on PTO independence: not stated for the 209 FA. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Fendt Farmer 209 FA” | 4WDTraktorenlexikon, “New Holland TN95 DA”; OECD test report 2346, 2006 | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2002–2009 | 2006–2007 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fendt 209 FA has 56% more hydraulic flow (26.6 L/min / 7.0 gpm) than the New Holland TN 95 DA (both pump flow, as stated by the source).
- The New Holland TN 95 DA is 11% heavier (290 kg / 639 lb) than the Fendt 209 FA (both unladen weight, as stated by the source).
- The Fendt 209 FA has 75% more forward gears (9 gears) than the New Holland TN 95 DA (both forward gears, as stated by the source).
- The Fendt 209 FA offers 750 rpm at the PTO, which the New Holland TN 95 DA does not (as stated by the sources).
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 209 FA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TN 95 DA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources