9 material differences · fewer than 12
Tractor oneFendt 1Z1963–1967No measured PTO figureTractor twoHermann Lanz D 5271968–1973No measured PTO figure
Which should you choose?
Read our verdict on the 1Z and the D 527 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 1Z | D 527 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24.5 hp | 23.6 hp | — |
| Engine declared | MWM AKD 112 Z | MWM D 208-2 | differs |
| Displacement declared | 1.81 L | 1.49 L | +22% 1Z |
| Maximum torque declared | 83 lb·ft · 113 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4–15.5 mph · 20–25 km/h | differs |
| Clutch declared | Single-disc dry clutch from Fichtel & Sachs | Maintenance-free double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.0 gpm · 15.0 L/min | — | — |
| Three-point lift, at the drawbar rail declared | 2,612 lb · 1,185 kg | 3,086 lb · 1,400 kg | +18% D 527 |
| Rear PTO speeds declared | 585 rpm | 570/1100 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,516 lb · 1,595 kg | 3,704 lb · 1,680 kg | +5% D 527 |
| Maximum permissible mass declared | 4,497 lb · 2,040 kg | — | — |
| Wheelbase declared | 73.5 in · 1,866 mm | 76.0 in · 1,930 mm | — |
| Length declared | 123.6 in · 3,139 mm | 126.0 in · 3,200 mm | — |
| Width declared | 59.8 in · 1,518 mm | 59.8 in · 1,520 mm | — |
| Ground clearance declared | 15.7 in · 400 mm | 13.4 in · 340 mm | +18% 1Z |
| Turning radius, braked declared | 10.1 ft · 3.07 m | — | — |
| Fuel tank declared | 32.8 qt · 31.0 L | 37.0 qt · 35 L | +13% D 527 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 1Z sources
Source
- Source: Traktorenlexikon, “Fendt Farmer 1 Z”
Hermann Lanz D 527 sources
Source
- Source: Traktorenlexikon, “HELA D527”