7 material differences · fewer than 12
Tractor oneFendt Farmer 11958–1961No measured PTO figureTractor twoInternational Harvester 3231966–1974No measured PTO figure
Which should you choose?
Read our verdict on the Farmer 1 and the 323 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | Farmer 1 | 323 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24.5 hp | 25.6 hp | — |
| Engine declared | — | INTERNATIONAL-HARVESTER DD-111 | — |
| Displacement declared | — | 1.83 L | — |
| Maximum torque declared | 71 lb·ft · 96 N·m | 80 lb·ft · 109 N·m | +14% 323 |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4 mph · 20 km/h | — |
| Clutch declared | — | Pedal operated dry Fichtel and Sachs single disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.2 gpm · 16 L/min | 6.6 gpm · 25.0 L/min | +56% 323 |
| Pressure declared | 1,707 psi · 118 bar | 3,553 psi · 245 bar | +108% 323 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,186 lb · 1,445 kg | 4,136 lb · 1,876 kg | +30% 323 |
| Maximum permissible mass declared | 5,071 lb · 2,300 kg | — | — |
| Wheelbase declared | 71.3 in · 1,810 mm | 71.5 in · 1,815 mm | — |
| Length declared | 115.9 in · 2,945 mm | 124.6 in · 3,165 mm | +7% 323 |
| Width declared | 62.0 in · 1,575 mm | 64.6 in · 1,642 mm | — |
| Ground clearance declared | 13.8 in · 350 mm | 14.3 in · 363 mm | — |
| Turning radius, braked declared | 10.1 ft · 3.07 m | 9.4 ft · 2.85 m | +8% Farmer 1 |
| Fuel tank declared | 29.6 qt · 28 L | 63.4 qt · 60.0 L | +114% 323 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Farmer 1 sources
- Source: Traktorenlexikon, “Fendt Farmer 1”
International Harvester 323 sources
- Source: Traktorenlexikon, “McCormick 323”
- Source: Traktorenlexikon, “McCormick D-324 Farmall”