12 material differences
Tractor oneFendt Farmer 1 D1971–1974No measured PTO figureTractor twoSOMECA 3151965–1968No measured PTO figure
Which should you choose?
Read our verdict on the Farmer 1 D and the 315 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Farmer 1 D | 315 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 33.4 hp | 32.6 hp | — |
| Engine declared | MWM D 325-3 | O.M.-FIAT 605 D 015 | differs |
| Displacement declared | 2.55 L | 1.90 L | +34% Farmer 1 D |
| Maximum torque declared | — | 80 lb·ft · 108 N·m | — |
| Transmission | |||
| Top speed declared | 12.4–15.5 mph · 20–25 km/h | 14.9 mph · 24 km/h | differs |
| Clutch declared | Single-plate dry clutch | Pedal operated dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.6 gpm · 17.6 L/min | 4.4 gpm · 16.5 L/min | +7% Farmer 1 D |
| Pressure declared | 2,538 psi · 175 bar | 2,843 psi · 196 bar | +12% 315 |
| Rear PTO speeds declared | 540/600 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,913 lb · 1,775 kg | 3,395 lb · 1,540 kg | +15% Farmer 1 D |
| Maximum permissible mass declared | 5,732 lb · 2,600 kg | — | — |
| Wheelbase declared | 78.5 in · 1,994 mm | 75.8 in · 1,925 mm | — |
| Length declared | 130.2 in · 3,308 mm | 118.7 in · 3,015 mm | +10% Farmer 1 D |
| Width declared | 59.9 in · 1,522 mm | 64.0–88.6 in · 1,625–2,250 mm | differs |
| Ground clearance declared | 16.3 in · 415 mm | 15.4 in · 390 mm | +6% Farmer 1 D |
| Turning radius, braked declared | 11.0 ft · 3.35 m | 11.0 ft · 3.35 m | — |
| Fuel tank declared | 32.8 qt · 31.0 L | 51.8 qt · 49.0 L | +58% 315 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Farmer 1 D sources
Source
- Source: Traktorenlexikon, “Fendt Farmer 1 D”
- Source: Traktorenlexikon, “Renault 60 R7253”
SOMECA 315 sources
Source
- Source: Traktorenlexikon, “Someca 315”
- Source: Traktorenlexikon, “Someca SOM 30 B”