Fendt F 345 GT or Fiat 440 (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the F 345 GT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 440 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt F 345 GT suits road haulage better on this data: 60% (15.0 km/h / 9.3 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt F 345 GT and Fiat 440 (DT), with the call on each
QuestionF 345 GT440 (DT)Call
Which puts more power through the PTO shaft?32.9 kW (44.1 hp)Traktorenlexikon, “Fendt F 345 GT”33.1 kW (44.4 hp)Traktorenlexikon, “Fiat 440/440 DT”Not comparableNot comparable on power at the PTO shaft: the F 345 GT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 440 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the F 345 GT and the 440 (DT).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the F 345 GT and the 440 (DT).
Which pumps more oil for implements?—26.8 L/min (7.1 gpm)Traktorenlexikon, “Fiat 440/440 DT”No figureNo call on hydraulic flow: no figure on record for the F 345 GT.
Which lifts more on the three-point hitch?2,170 kg (4,784 lb)Traktorenlexikon, “Fendt F 345 GT”1,750 kg (3,858 lb)Traktorenlexikon, “Fiat 440/440 DT”Not comparableNot comparable on three-point lift: the F 345 GT: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt F 345 GT”); the 440 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat 440/440 DT”) — not the same quantity, basis and condition.
Which is heavier, for traction?3,025 kg (6,669 lb)Traktorenlexikon, “Fendt F 345 GT”1,900 kg (4,189 lb)Traktorenlexikon, “Fiat 440/440 DT”Ahead (a fact, not an advantage)The Fendt F 345 GT is 59% heavier (1,125 kg / 2,480 lb) than the Fiat 440 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,400 kg (11,905 lb)Traktorenlexikon, “Fendt F 345 GT”—No figureNo call on maximum permissible mass: no figure on record for the 440 (DT).
Which has the wider choice of gears?20 to 21Traktorenlexikon, “Fendt F 345 GT”8 to 12Traktorenlexikon, “Fiat 440/440 DT”AheadThe Fendt F 345 GT has 67% more forward gears (8 gears) than the Fiat 440 (DT) (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the F 345 GT and the 440 (DT).
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Fendt F 345 GT”25 km/h (15.5 mph)Traktorenlexikon, “Fiat 440/440 DT”AheadThe Fendt F 345 GT has 60% more top speed (15.0 km/h / 9.3 mph) than the Fiat 440 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/750/1000 rpmTraktorenlexikon, “Fendt F 345 GT”540 rpmTraktorenlexikon, “Fiat 440/440 DT”AheadThe Fendt F 345 GT offers 750 and 1000 rpm at the PTO, which the Fiat 440 (DT) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fendt F 345 GT”—No figureNo call on PTO independence: not stated for the 440 (DT).
Which drives on both axles?2WDTraktorenlexikon, “Fendt F 345 GT”Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 440/440 DT”AheadThe Fiat 440 (DT) is available with four-wheel drive; the Fendt F 345 GT is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1984–19961982EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt F 345 GT is 59% heavier (1,125 kg / 2,480 lb) than the Fiat 440 (DT) (both unladen weight, as stated by the source).
  • The Fendt F 345 GT has 67% more forward gears (8 gears) than the Fiat 440 (DT) (both forward gears, as stated by the source).
  • The Fendt F 345 GT has 60% more top speed (15.0 km/h / 9.3 mph) than the Fiat 440 (DT) (both top speed forward, as stated by the source).
  • The Fendt F 345 GT offers 750 and 1000 rpm at the PTO, which the Fiat 440 (DT) does not (as stated by the sources).
  • The Fiat 440 (DT) is available with four-wheel drive; the Fendt F 345 GT is two-wheel drive (as stated by the sources).
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the F 345 GT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 440 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the F 345 GT: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt F 345 GT”); the 440 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat 440/440 DT”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources