10 material differences · fewer than 12
Tractor oneFendt 820 Vario greentec2004–2011No measured PTO figureTractor twoFendt 924 Vario2006–2014No measured PTO figure
Which should you choose?
Read our verdict on the 820 Vario greentec and the 924 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 820 Vario greentec | 924 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 204 hp | 207 hp | — |
| Engine declared | — | Deutz TCD 2013 LO6 4V | — |
| Displacement declared | — | 7.14 L | — |
| Maximum torque declared | 660 lb·ft · 895 N·m | 738 lb·ft · 1,000 N·m | +12% 924 Vario |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 31.1–37.3 mph · 50–60 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 15,840 lb · 7,185 kg | 22,223 lb · 10,080 kg | +40% 924 Vario |
| Maximum permissible mass declared | 27,558 lb · 12,500 kg | 33,069–39,683 lb · 15,000–18,000 kg | differs |
| Wheelbase declared | 107.1 in · 2,720 mm | 120.1 in · 3,050 mm | +12% 924 Vario |
| Length declared | 187.1 in · 4,753 mm | 222.6 in · 5,655 mm | +19% 924 Vario |
| Width declared | 101.2 in · 2,570 mm | 108.3 in · 2,750 mm | +7% 924 Vario |
| Ground clearance declared | 22.3 in · 566 mm | 18.9 in · 480 mm | +18% 820 Vario greentec |
| Turning radius, braked declared | — | 19.9 ft · 6.08 m | — |
| Fuel tank declared | 359.3 qt · 340 L | 697.4 qt · 660 L | +94% 924 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 820 Vario greentec sources
- Source: Traktorenlexikon, “Fendt 820 Vario greentec”
Fendt 924 Vario sources
- Source: Traktorenlexikon, “Fendt 924 Vario”
- Source: Traktorenlexikon, “Fendt 922 Vario”
- Source: OECD test report 2545, 2010