10 material differences · fewer than 12
Tractor oneFendt 819 Vario2010–2011No measured PTO figureTractor twoHürlimann SX 18002000–2004No measured PTO figure
Which should you choose?
Read our verdict on the 819 Vario and the SX 1800 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 819 Vario | SX 1800 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 177 hp | 177.6 hp | — |
| Engine declared | Deutz TCD 6.1 L6 | SAME-DEUTZ-FAHR 1000.6 WTI-3V | differs |
| Displacement declared | 6.06 L | 6.00 L | — |
| Maximum torque declared | 637 lb·ft · 863 N·m | 553 lb·ft · 750 N·m | +15% 819 Vario |
| Transmission | |||
| Top speed declared | 37.3 mph · 60 km/h | 24.9 mph · 40 km/h | +50% 819 Vario |
| Clutch declared | multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 51.0 gpm · 193.0 L/min | 29.9 gpm · 113.0 L/min | +71% 819 Vario |
| Pressure declared | — | 3,046 psi · 210 bar | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 20,503 lb · 9,300 kg | 15,653 lb · 7,100 kg | +31% 819 Vario |
| Maximum permissible mass declared | 30,865 lb · 14,000 kg | — | — |
| Wheelbase declared | 114.2 in · 2,900 mm | 112.2 in · 2,850 mm | — |
| Length declared | 207.6 in · 5,274 mm | 191.4 in · 4,861 mm | +8% 819 Vario |
| Width declared | 103.1 in · 2,620 mm | 95.5 in · 2,426 mm | +8% 819 Vario |
| Ground clearance declared | 20.2 in · 513 mm | 23.4 in · 594 mm | +16% SX 1800 |
| Fuel tank declared | 533.6 qt · 505 L | 422.7 qt · 400.0 L | +26% 819 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 819 Vario sources
- Source: Traktorenlexikon, “Fendt 819 Vario”
Hürlimann SX 1800 sources
- Source: Traktorenlexikon, “Hürlimann SX 1800”
- Source: Traktorenlexikon, “Hürlimann SX 1500”