9 material differences · fewer than 12
Tractor oneFendt 724 Variofrom 2011No measured PTO figureTractor twoSteyr-Case 9250 a1997–1999No measured PTO figure
Which should you choose?
Read our verdict on the 724 Vario and the 9250 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 724 Vario | 9250 a | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 233 hp | 235.9 hp | — |
| Engine declared | Deutz TCD 6.1 L6 | CASE-IH 6TA-830 | differs |
| Displacement declared | 6.06 L | 8.27 L | +37% 9250 a |
| Maximum torque declared | 780 lb·ft · 1,058 N·m | 771 lb·ft · 1,045 N·m | — |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | PTO multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 29.7 gpm · 112.4 L/min | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 17,417 lb · 7,900 kg | 18,170 lb · 8,242 kg | — |
| Maximum permissible mass declared | 27,558 lb · 12,500 kg | 25,519 lb · 11,575 kg | +8% 724 Vario |
| Wheelbase declared | 109.6 in · 2,783 mm | 118.3 in · 3,006 mm | +8% 9250 a |
| Length declared | 206.3 in · 5,240 mm | 200.4 in · 5,090 mm | — |
| Width declared | 100.4 in · 2,550 mm | 120.0–153.1 in · 3,048–3,890 mm | differs |
| Ground clearance declared | 21.7 in · 552 mm | 19.3 in · 489 mm | +13% 724 Vario |
| Fuel tank declared | 422.7 qt · 400 L | 379.4 qt · 359.0 L | +11% 724 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 724 Vario sources
- Source: Traktorenlexikon, “Fendt 724 Vario”
- Source: Traktorenlexikon, “Fendt 819 Vario”
Steyr-Case 9250 a sources
- Source: Traktorenlexikon, “Steyr 9250 a”
- Source: Traktorenlexikon, “Steyr 9220 a”