Fendt 414 Vario or John Deere 6630?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 414 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6630 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt 414 Vario and John Deere 6630, with the call on each
Question414 Vario6630Call
Which puts more power through the PTO shaft?96 kW (129 hp)Traktorenlexikon, “Fendt 414 Vario”95.7 kW (128.3 hp)Traktorenlexikon, “John Deere 6630”Not comparableNot comparable on power at the PTO shaft: the 414 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6630 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 414 Vario and the 6630.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 414 Vario and the 6630.
Which pumps more oil for implements?No figureNo call on hydraulic flow: no figure on record for the 414 Vario and the 6630.
Which lifts more on the three-point hitch?7,549 kg (16,643 lb)Traktorenlexikon, “Fendt 414 Vario”No figureNo call on three-point lift: no figure on record for the 6630.
Which is heavier, for traction?5,450 kg (12,015 lb)Traktorenlexikon, “Fendt 414 Vario”5,250 kg (11,574 lb)Traktorenlexikon, “John Deere 6630”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?9,500 kg (20,944 lb)Traktorenlexikon, “John Deere 6630”No figureNo call on maximum permissible mass: no figure on record for the 414 Vario.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Fendt 414 Vario”16 to 24 forwardTraktorenlexikon, “John Deere 6630”DifferTransmissions differ in kind: the Fendt 414 Vario is stepless (CVT) and the John Deere 6630 has 16 to 24 forward gears — not called.
Which offers a creeper range?YesTraktorenlexikon, “Fendt 414 Vario”No figureNo call on a creeper range: not stated for the 6630.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Fendt 414 Vario”40 km/h (24.9 mph)Traktorenlexikon, “John Deere 6630”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/540E/1000 rpmTraktorenlexikon, “Fendt 414 Vario”540E/540/1000 rpmTraktorenlexikon, “John Deere 6630”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “John Deere 6630”No figureNo call on PTO independence: not stated for the 414 Vario.
Which drives on both axles?4WDTraktorenlexikon, “Fendt 414 Vario”4WDTraktorenlexikon, “John Deere 6630”; OECD test report 2469, 2009EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2006–20132007–2012EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the Fendt 414 Vario is stepless (CVT) and the John Deere 6630 has 16 to 24 forward gears — not called.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 414 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6630 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources