11 material differences · fewer than 12
Tractor oneFendt 414 Vario2006–2013No measured PTO figureTractor twoJohn Deere 66302007–2012No measured PTO figure
Which should you choose?
Read our verdict on the 414 Vario and the 6630 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 414 Vario | 6630 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 129 hp | 128.3 hp | — |
| Engine declared | Deutz TCD 2012 L4-4V | John Deere PowrTech 6.068 HL-280/V2-CR | differs |
| Displacement declared | 4.04 L | 6.79 L | +68% 6630 |
| Maximum torque declared | 452 lb·ft · 613 N·m | 389 lb·ft · 527 N·m | +16% 414 Vario |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Turbo clutch function | Pedal-operated, hydraulic wet Perma-Clutch II as multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pressure declared | — | 3,408 psi · 235 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540E/540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,015 lb · 5,450 kg | 11,574 lb · 5,250 kg | — |
| Maximum permissible mass declared | — | 20,944 lb · 9,500 kg | — |
| Wheelbase declared | 95.2 in · 2,417 mm | 104.3 in · 2,650 mm | +10% 6630 |
| Length declared | 168.5 in · 4,281 mm | 186.1 in · 4,728 mm | +10% 6630 |
| Width declared | 96.1 in · 2,440 mm | 91.2 in · 2,316 mm | +5% 414 Vario |
| Ground clearance declared | 19.0 in · 482 mm | 22.4 in · 570 mm | +18% 6630 |
| Fuel tank declared | 258.9 qt · 245 L | 218.7 qt · 207.0 L | +18% 414 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 414 Vario sources
- Source: Traktorenlexikon, “Fendt 414 Vario”
- Source: Traktorenlexikon, “Fendt 411 Vario”
John Deere 6630 sources
- Source: Traktorenlexikon, “John Deere 6630”
- Source: OECD test report 2469, 2009