6 material differences · fewer than 12
Tractor oneFendt Vario 209 V/F/Pfrom 2009No measured PTO figureTractor twoVALMET 8001997–2002No measured PTO figure
Which should you choose?
Read our verdict on the Vario 209 V/F/P and the 800 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Vario 209 V/F/P | 800 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 79 hp | 79 hp | — |
| Engine declared | — | VALMET 420 DS or DSRE | — |
| Displacement declared | — | 4.40 L | — |
| Maximum torque declared | 275 lb·ft · 373 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry LuK double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | 28.0 gpm · 106.0 L/min | 14.7 gpm · 55.7 L/min | +90% Vario 209 V/F/P |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540E/540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,129–6,790 lb · 2,780–3,080 kg | 7,341 lb · 3,330 kg | differs |
| Wheelbase declared | 85.0 in · 2,160 mm | 88.3 in · 2,244 mm | — |
| Length declared | 140.9–145.7 in · 3,578–3,701 mm | 152.6 in · 3,877 mm | differs |
| Width declared | 45.3–66.1 in · 1,151–1,679 mm | 85.7 in · 2,177 mm | differs |
| Ground clearance declared | — | 19.9 in · 505 mm | — |
| Turning radius, braked declared | — | 15.7 ft · 4.80 m | — |
| Fuel tank declared | 80.3 qt · 76 L | 83.5 qt · 79.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Vario 209 V/F/P sources
- Source: Traktorenlexikon, “Fendt 209 V/F/P”
VALMET 800 sources
- Source: Traktorenlexikon, “Valmet 800”