5 material differences · fewer than 12
Tractor oneFahr D 881956–1960No measured PTO figureTractor twoGüldner A 2 KS Spessart1958–1965No measured PTO figure
Which should you choose?
Read our verdict on the D 88 and the A 2 KS Spessart → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | D 88 | A 2 KS Spessart | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | — | 15 hp | — |
| Engine declared | — | Güldner 2 LKN | — |
| Displacement declared | — | 0.89 L | — |
| Maximum torque declared | 30 lb·ft · 41 N·m | 30 lb·ft · 41 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 12.0 mph · 19.33 km/h | +29% D 88 |
| Clutch declared | Pedal operated dry Fichtel & Sachs single-plate clutch | Pedal-operated dry Fichtel & Sachs single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pressure declared | 1,707 psi · 118 bar | 2,176 psi · 150 bar | +27% A 2 KS Spessart |
| Rear PTO speeds declared | 568 rpm | 568 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 1,907 lb · 865 kg | 1,962 lb · 890 kg | — |
| Maximum permissible mass declared | 2,976 lb · 1,350 kg | 3,307 lb · 1,500 kg | +11% A 2 KS Spessart |
| Wheelbase declared | 65.0 in · 1,650 mm | 65.0 in · 1,650 mm | — |
| Length declared | 104.5 in · 2,655 mm | 112.2 in · 2,850 mm | +7% A 2 KS Spessart |
| Width declared | 57.9 in · 1,470 mm | 57.5 in · 1,460 mm | — |
| Ground clearance declared | 13.8 in · 350 mm | — | — |
| Turning radius, braked declared | 8.6 ft · 2.63 m | 8.7 ft · 2.65 m | — |
| Fuel tank declared | 20.1 qt · 19 L | 20.1 qt · 19 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fahr D 88 sources
- Source: Traktorenlexikon, “Fahr D 88 E”
- Source: Traktorenlexikon, “Fahr D 88”
Güldner A 2 KS Spessart sources
- Source: Traktorenlexikon, “Güldner A 2 KS Spessart”