Fahr D 60 L vs International Harvester 624 (A)

14 material differences

Tractor one

1952–1955

No measured PTO figure

Tractor two

1965–1972

No measured PTO figure

Which should you choose?

Read our verdict on the D 60 L and the 624 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

Fahr D 60 L and International Harvester 624 (A), field by field
Field	D 60 L	624 (A)	Gap
Engine
Engine power, claimed claimed	59.3 hp	57.3 hp	—
Engine declared	KHD F4L 514	INTERNATIONAL-HARVESTER D-206	differs
Displacement declared	5.32 L	3.38 L	+57% D 60 L
Maximum torque declared	201 lb·ft · 273 N·m	151 lb·ft · 205 N·m	+33% D 60 L
Transmission
Top speed declared	20.1 mph · 32.3 km/h	12.4–15.5 mph · 20–25 km/h	differs
Clutch declared	Pedal operated dry Fichtel and Sachs single plate clutch	Pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	4.9 gpm · 18.5 L/min	7.5 gpm · 28.3 L/min	+53% 624 (A)
Pressure declared	1,707 psi · 118 bar	3,553 psi · 245 bar	+108% 624 (A)
Three-point lift at ends declared	—	3,748 lb · 1,700 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	7,628 lb · 3,460 kg	5,575 lb · 2,529 kg	+37% D 60 L
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	90.6 in · 2,300 mm	83.5 in · 2,120 mm	+8% D 60 L
Length declared	153.1 in · 3,890 mm	139.0 in · 3,530 mm	+10% D 60 L
Width declared	78.2 in · 1,987 mm	71.5 in · 1,815 mm	+9% D 60 L
Height declared	61.2 in · 1,555 mm	95.2 in · 2,419 mm	+56% 624 (A)
Ground clearance declared	15.7 in · 400 mm	16.5 in · 419 mm	—
Turning radius, braked declared	12.6 ft · 3.85 m	12.0 ft · 3.65 m	+5% D 60 L
Fuel tank declared	95.1 qt · 90 L	74.0 qt · 70.0 L	+29% D 60 L

Source

Source