Fahr D 45 L vs International Harvester WD-9
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the D 45 L and the WD-9 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 45 L | WD-9 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 46.4 hp | — |
| Engine declared | KHD F3L 514 | INTERNATIONAL HARVESTER D-335 | differs |
| Displacement declared | 3.99 L | 5.48 L | +37% WD-9 |
| Maximum torque declared | 164 lb·ft · 223 N·m | — | — |
| Transmission | |||
| Top speed declared | 13.0–18.6 mph · 21–30 km/h | 16.2 mph · 26 km/h | differs |
| Clutch declared | — | Pedal operated dry ROCKFORD single plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.9 gpm · 18.5 L/min | — | — |
| Pressure declared | 3,129 psi · 216 bar | — | — |
| Rear PTO speeds declared | 587 rpm | 538 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,335 lb · 2,420 kg | 5,851 lb · 2,654 kg | +10% WD-9 |
| Maximum permissible mass declared | 9,700 lb · 4,400 kg | — | — |
| Wheelbase declared | 82.7 in · 2,100 mm | 83.0 in · 2,108 mm | — |
| Length declared | 144.1 in · 3,660 mm | 134.3 in · 3,410 mm | +7% D 45 L |
| Width declared | 73.4 in · 1,865 mm | 75.7 in · 1,924 mm | — |
| Height declared | 91.5 in · 2,325 mm | 81.9 in · 2,080 mm | +12% D 45 L |
| Ground clearance declared | 16.8 in · 427 mm | — | — |
| Turning radius, braked declared | 12.0 ft · 3.65 m | — | — |
| Fuel tank declared | 68.7 qt · 65 L | 140.0 qt · 132.5 L | +104% WD-9 |
Fahr D 45 L sources
Source
- Source: Traktorenlexikon, “Fahr D 45 L”
International Harvester WD-9 sources
Source
- Source: Traktorenlexikon, “McCormick WD-9”