Fahr D 400 C vs John Deere 620
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the D 400 C and the 620 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D 400 C | 620 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.1 hp | 43.4 hp | — |
| Engine declared | KHD F3L 514 | — | — |
| Displacement declared | 3.99 L | — | — |
| Maximum torque declared | 164 lb·ft · 223 N·m | 90 lb·ft · 122 N·m | +83% D 400 C |
| Transmission | |||
| Top speed declared | 12.9–18.6 mph · 20.8–30.0 km/h | 11.8 mph · 19 km/h | differs |
| Clutch declared | Pedal operated dry Fichtel & Sachs single-plate clutch | Hand lever operated dry single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.9 gpm · 18.5 L/min | 8.9 gpm · 33.7 L/min | +82% 620 |
| Pressure declared | 1,707 psi · 118 bar | — | — |
| Rear PTO speeds declared | 575 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,666 lb · 2,570 kg | 5,858 lb · 2,657 kg | — |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 82.7 in · 2,100 mm | 80.5 in · 2,045 mm | — |
| Length declared | 134.3 in · 3,410 mm | 135.2 in · 3,435 mm | — |
| Width declared | 73.4 in · 1,865 mm | 86.6 in · 2,200 mm | +18% 620 |
| Height declared | 91.5 in · 2,325 mm | 66.0 in · 1,676 mm | +39% D 400 C |
| Ground clearance declared | 16.2 in · 412 mm | 13.0 in · 330 mm | +25% D 400 C |
| Turning radius, braked declared | 12.0 ft · 3.65 m | — | — |
| Fuel tank declared | 68.7 qt · 65 L | — | — |
Fahr D 400 C sources
Source
- Source: Traktorenlexikon, “Fahr D 400 C”
- Source: Traktorenlexikon, “Fahr D 45 L”
John Deere 620 sources
Source
- Source: Traktorenlexikon, “John Deere Modell 620”