Fahr D 400 C vs Fiat 45-R

12 material differences

Tractor one

1954–1957

No measured PTO figure

Tractor two

from 1952

No measured PTO figure

Which should you choose?

Read our verdict on the D 400 C and the 45-R → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Fahr D 400 C and Fiat 45-R, field by field
Field	D 400 C	45-R	Gap
Engine
Engine power, claimed claimed	44.1 hp	44.4 hp	—
Engine declared	KHD F3L 514	O.M.-FIAT CO 1D-45/Var. 10	differs
Displacement declared	3.99 L	4.16 L	—
Maximum torque declared	164 lb·ft · 223 N·m	167 lb·ft · 226 N·m	—
Transmission
Top speed declared	12.9–18.6 mph · 20.8–30.0 km/h	9.9 mph · 16 km/h	differs
Clutch declared	Pedal operated dry Fichtel & Sachs single-plate clutch	Pedal-operated dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	4.9 gpm · 18.5 L/min	5.3 gpm · 20.0 L/min	+8% 45-R
Pressure declared	1,707 psi · 118 bar	—	—
Three-point lift at ends declared	—	2,094 lb · 950 kg	—
Rear PTO speeds declared	575 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,666 lb · 2,570 kg	5,071 lb · 2,300 kg	+12% D 400 C
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	82.7 in · 2,100 mm	74.8 in · 1,900 mm	+11% D 400 C
Length declared	134.3 in · 3,410 mm	116.3 in · 2,955 mm	+15% D 400 C
Width declared	73.4 in · 1,865 mm	60.4 in · 1,535 mm	+21% D 400 C
Height declared	91.5 in · 2,325 mm	74.6 in · 1,895 mm	+23% D 400 C
Ground clearance declared	16.2 in · 412 mm	15.7 in · 400 mm	—
Turning radius, braked declared	12.0 ft · 3.65 m	10.8 ft · 3.30 m	+11% D 400 C
Fuel tank declared	68.7 qt · 65 L	53.9 qt · 51.0 L	+27% D 400 C

Source

Source