Fahr D 181 vs International Harvester 323

10 material differences · fewer than 12

Tractor one

1955–1958

No measured PTO figure

Tractor two

1966–1974

No measured PTO figure

Which should you choose?

Read our verdict on the D 181 and the 323 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Fahr D 181 and International Harvester 323, field by field
Field	D 181	323	Gap
Engine
Engine power, claimed claimed	23.6 hp	25.6 hp	+9% 323
Engine declared	MWM AKD-12 Z or AKD-112 Z	INTERNATIONAL-HARVESTER DD-111	differs
Displacement declared	1.81 L	1.83 L	—
Maximum torque declared	66 lb·ft · 89 N·m	80 lb·ft · 109 N·m	+22% 323
Transmission
Top speed declared	8.0 mph · 12.8 km/h	12.4 mph · 20 km/h	+56% 323
Clutch declared	—	Pedal operated dry Fichtel and Sachs single disc clutch	—
Hydraulics & hitch
Pump flow declared	—	6.6 gpm · 25.0 L/min	—
Pressure declared	3,129 psi · 216 bar	3,553 psi · 245 bar	+13% 323
Rear PTO speeds declared	600 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	2,778 lb · 1,260 kg	4,136 lb · 1,876 kg	+49% 323
Maximum permissible mass declared	4,299 lb · 1,950 kg	—	—
Wheelbase declared	68.4 in · 1,737 mm	71.5 in · 1,815 mm	—
Length declared	106.2 in · 2,697 mm	124.6 in · 3,165 mm	+17% 323
Width declared	42.2 in · 1,072 mm	64.6 in · 1,642 mm	+53% 323
Height declared	59.1 in · 1,500 mm	56.5 in · 1,434 mm	—
Ground clearance declared	16.7 in · 425 mm	14.3 in · 363 mm	+17% D 181
Turning radius, braked declared	9.4 ft · 2.85 m	9.4 ft · 2.85 m	—
Fuel tank declared	31.7 qt · 30 L	63.4 qt · 60.0 L	+100% 323

Source

Source