Fahr D 181 or Ford 741/771 Workmaster?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the Ford 741/771 Workmaster is ahead on top speed.

  • The Ford 741/771 Workmaster suits road haulage better on this data: 119% (15.2 km/h / 9.4 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fahr D 181 and Ford 741/771 Workmaster, with the call on each
QuestionD 181741/771 WorkmasterCall
Which puts more power through the PTO shaft?17.7 kW (24 hp)Traktorenlexikon, “Fahr D 181”18.8 kW (25.2 hp)Traktorenlexikon, “Ford 701”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the D 181 and the 741/771 Workmaster.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the D 181 and the 741/771 Workmaster.
Which pumps more oil for implements?15.0 L/min (4.0 gpm)Traktorenlexikon, “Ford 701”No figureNo call on hydraulic flow: no figure on record for the D 181.
Which lifts more on the three-point hitch?690 kg (1,521 lb)Traktorenlexikon, “Fahr D 181”567 kg (1,250 lb)Traktorenlexikon, “Ford 701”Not comparableNot comparable on three-point lift: the D 181: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fahr D 181”); the 741/771 Workmaster: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Ford 701”) — not the same quantity, basis and condition.
Which is heavier, for traction?1,260 kg (2,778 lb)Traktorenlexikon, “Fahr D 181”1,542 kg (3,400 lb)Traktorenlexikon, “Ford 701”Ahead (a fact, not an advantage)The Ford 741/771 Workmaster is 22% heavier (282 kg / 622 lb) than the Fahr D 181 (both unladen weight, as stated by the source).
Which may carry more ballast and load?1,950 kg (4,299 lb)Traktorenlexikon, “Fahr D 181”No figureNo call on maximum permissible mass: no figure on record for the 741/771 Workmaster.
Which has the wider choice of gears?4 to 5Traktorenlexikon, “Fahr D 181”4 to 10Traktorenlexikon, “Ford 701”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the D 181 and the 741/771 Workmaster.
Which is faster on the road?12.8 km/h (8.0 mph)Traktorenlexikon, “Fahr D 181”28 km/h (17.4 mph)Traktorenlexikon, “Ford 701”AheadThe Ford 741/771 Workmaster has 119% more top speed (15.2 km/h / 9.4 mph) than the Fahr D 181 (both top speed forward, as stated by the source).
Which offers more PTO speeds?600 rpmTraktorenlexikon, “Fahr D 181”540 rpmTraktorenlexikon, “Ford 701”No figureNo call on PTO speeds: no standard PTO speed stated for the D 181.
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the D 181 and the 741/771 Workmaster.
Which drives on both axles?2WDTraktorenlexikon, “Fahr D 181”2WDTraktorenlexikon, “Ford 701”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1955–19581958–1962EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Ford 741/771 Workmaster is 22% heavier (282 kg / 622 lb) than the Fahr D 181 (both unladen weight, as stated by the source).
  • The Ford 741/771 Workmaster has 119% more top speed (15.2 km/h / 9.4 mph) than the Fahr D 181 (both top speed forward, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on three-point lift: the D 181: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fahr D 181”); the 741/771 Workmaster: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Ford 701”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources