Fahr D 181 vs Ford 741/771 Workmaster

10 material differences · fewer than 12

Tractor one

1955–1958

No measured PTO figure

Tractor two

1958–1962

No measured PTO figure

Which should you choose?

Read our verdict on the D 181 and the 741/771 Workmaster → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 1 fields identical or within 5%, which is not counted as material

Fahr D 181 and Ford 741/771 Workmaster, field by field
Field	D 181	741/771 Workmaster	Gap
Engine
Engine power, claimed claimed	23.6 hp	42.1 hp	+78% 741/771 Workmaster
Engine declared	MWM AKD-12 Z or AKD-112 Z	—	—
Displacement declared	1.81 L	—	—
Maximum torque declared	66 lb·ft · 89 N·m	121 lb·ft · 164 N·m	+84% 741/771 Workmaster
Transmission
Top speed declared	8.0 mph · 12.8 km/h	17.4 mph · 28 km/h	+119% 741/771 Workmaster
Hydraulics & hitch
Pump flow declared	—	4.0 gpm · 15.0 L/min	—
Pressure declared	3,129 psi · 216 bar	—	—
Three-point lift at ends declared	—	1,250 lb · 567 kg	—
Rear PTO speeds declared	600 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	2,778 lb · 1,260 kg	3,400 lb · 1,542 kg	+22% 741/771 Workmaster
Maximum permissible mass declared	4,299 lb · 1,950 kg	—	—
Wheelbase declared	68.4 in · 1,737 mm	85.3 in · 2,167 mm	+25% 741/771 Workmaster
Length declared	106.2 in · 2,697 mm	132.0 in · 3,353 mm	+24% 741/771 Workmaster
Width declared	42.2 in · 1,072 mm	71.7 in · 1,821 mm	+70% 741/771 Workmaster
Height declared	59.1 in · 1,500 mm	65.1 in · 1,653 mm	+10% 741/771 Workmaster
Ground clearance declared	16.7 in · 425 mm	27.5 in · 698 mm	+64% 741/771 Workmaster
Turning radius, braked declared	9.4 ft · 2.85 m	9.2 ft · 2.81 m	—
Fuel tank declared	31.7 qt · 30 L	62.3 qt · 59.0 L	+97% 741/771 Workmaster

Source

Source