Fahr D 180 H vs SOMECA 250 (DT)

10 material differences · fewer than 12

Tractor one

1954–1959

No measured PTO figure

Tractor two

1968–1971

No measured PTO figure

Which should you choose?

Read our verdict on the D 180 H and the 250 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Fahr D 180 H and SOMECA 250 (DT), field by field
Field	D 180 H	250 (DT)	Gap
Engine
Engine power, claimed claimed	23.7 hp	24.7 hp	—
Engine declared	MWM AKD-12 Z or AKD-112 Z	FIAT-TRATTORI 852 A	differs
Displacement declared	1.81 L	1.56 L	+16% D 180 H
Maximum torque declared	66 lb·ft · 89 N·m	58 lb·ft · 79 N·m	+13% D 180 H
Transmission
Top speed declared	12.4 mph · 20 km/h	15.5 mph · 25 km/h	+25% 250 (DT)
Hydraulics & hitch
Pump flow declared	—	2.5 gpm · 9.3 L/min	—
Pressure declared	3,129 psi · 216 bar	—	—
Three-point lift at ends declared	—	1,323 lb · 600 kg	—
Rear PTO speeds declared	600 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	3,142 lb · 1,425 kg	2,359 lb · 1,070 kg	+33% D 180 H
Maximum permissible mass declared	4,409 lb · 2,000 kg	—	—
Wheelbase declared	71.6 in · 1,818 mm	66.9 in · 1,700 mm	+7% D 180 H
Length declared	110.6 in · 2,810 mm	115.4 in · 2,930 mm	—
Width declared	61.5 in · 1,562 mm	57.7 in · 1,465 mm	+7% D 180 H
Height declared	62.2 in · 1,580 mm	61.8 in · 1,570 mm	—
Ground clearance declared	15.4 in · 390 mm	18.5 in · 470 mm	+21% 250 (DT)
Turning radius, braked declared	8.4 ft · 2.55 m	9.2 ft · 2.80 m	+10% 250 (DT)
Fuel tank declared	31.7 qt · 30 L	30.6 qt · 29.0 L	—

Source

Source