Fahr D 135 vs Güldner A 2 D

11 material differences · fewer than 12

Tractor one

1958–1959

No measured PTO figure

Tractor two

1959–1960

No measured PTO figure

Which should you choose?

Read our verdict on the D 135 and the A 2 D → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fahr D 135 and Güldner A 2 D, field by field
Field	D 135	A 2 D	Gap
Engine
Engine power, claimed claimed	17.7 hp	19.6 hp	+11% A 2 D
Engine declared	Güldner 2 DNSF	Güldner 2 DNS	differs
Displacement declared	1.31 L	1.31 L	—
Maximum torque declared	49 lb·ft · 67 N·m	54 lb·ft · 74 N·m	+10% A 2 D
Transmission
Top speed declared	11.8 mph · 19 km/h	12.2 mph · 19.6 km/h	—
Clutch declared	Pedal operated dry Fichtel & Sachs single disc clutch	Pedal operated dry single clutch	differs
Hydraulics & hitch
Pump flow declared	—	1.8 gpm · 7.0 L/min	—
Pressure declared	3,129 psi · 216 bar	2,134 psi · 147 bar	+47% D 135
Three-point lift at ends declared	2,425 lb · 1,100 kg	—	—
Rear PTO speeds declared	525 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	2,557 lb · 1,160 kg	2,954 lb · 1,340 kg	+16% A 2 D
Maximum permissible mass declared	3,660 lb · 1,660 kg	4,409 lb · 2,000 kg	+20% A 2 D
Wheelbase declared	66.6 in · 1,692 mm	72.8 in · 1,850 mm	+9% A 2 D
Length declared	104.7 in · 2,660 mm	121.3 in · 3,080 mm	+16% A 2 D
Width declared	57.5 in · 1,460 mm	59.8 in · 1,520 mm	—
Height declared	61.4 in · 1,560 mm	54.5 in · 1,385 mm	+13% D 135
Ground clearance declared	14.3 in · 364 mm	14.2 in · 360 mm	—
Turning radius, braked declared	7.7 ft · 2.35 m	7.9 ft · 2.42 m	—
Fuel tank declared	31.7 qt · 30 L	37.0 qt · 35 L	+17% A 2 D

Source

Source