2 material differences · fewer than 12
Tractor oneFahr D 130 AH1957–1959No measured PTO figureTractor twoFahr D 135 H1958–1959No measured PTO figure
Which should you choose?
Read our verdict on the D 130 AH and the D 135 H → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
2 material differences · 12 fields identical or within 5%, which is not counted as material
| Field | D 130 AH | D 135 H | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 16.8 hp | 17.7 hp | +6% D 135 H |
| Engine declared | Güldner 2 LD | Güldner 2 DNSF | differs |
| Displacement declared | 1.31 L | 1.31 L | — |
| Maximum torque declared | 48 lb·ft · 65 N·m | 49 lb·ft · 67 N·m | — |
| Transmission | |||
| Top speed declared | 12.0 mph · 19.3 km/h | 12.4 mph · 20 km/h | — |
| Clutch declared | — | Pedal operated dry Fichtel & Sachs single-plate clutch | — |
| Hydraulics & hitch | |||
| Pressure declared | 3,129 psi · 216 bar | 3,129 psi · 216 bar | — |
| Rear PTO speeds declared | 538 rpm | 525 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,712 lb · 1,230 kg | 2,734 lb · 1,240 kg | — |
| Maximum permissible mass declared | 4,409 lb · 2,000 kg | 4,409 lb · 2,000 kg | — |
| Wheelbase declared | 68.3 in · 1,735 mm | 66.4 in · 1,687 mm | — |
| Length declared | 108.1 in · 2,747 mm | 106.4 in · 2,702 mm | — |
| Width declared | 57.5 in · 1,460 mm | 57.5 in · 1,460 mm | — |
| Ground clearance declared | 18.3 in · 464 mm | 18.3 in · 465 mm | — |
| Turning radius, braked declared | 7.7 ft · 2.35 m | 7.7 ft · 2.35 m | — |
| Fuel tank declared | 31.7 qt · 30 L | 31.7 qt · 30 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fahr D 130 AH sources
- Source: Traktorenlexikon, “Fahr D 130 AH”
- Source: Traktorenlexikon, “Fahr D 131 L”
Fahr D 135 H sources
- Source: Traktorenlexikon, “Fahr D 135 H”
- Source: Traktorenlexikon, “Fahr D 135”