11 material differences · fewer than 12
Tractor oneEicher EM 300/2 Königstiger1963–1968No measured PTO figureTractor twoInternational Harvester International 3401958–1963No measured PTO figure
Which should you choose?
Read our verdict on the EM 300/2 Königstiger and the International 340 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | EM 300/2 Königstiger | International 340 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 37.3 hp | 37.4 hp | — |
| Engine declared | Eicher EDK 3 | INTERNATIONAL HARVESTER C-135 | differs |
| Displacement declared | 2.94 L | 2.21 L | +33% EM 300/2 Königstiger |
| Maximum torque declared | 122 lb·ft · 166 N·m | 128 lb·ft · 174 N·m | — |
| Transmission | |||
| Top speed declared | 12.3 mph · 19.8 km/h | 15.5 mph · 25 km/h | +26% International 340 |
| Clutch declared | double clutch with continuously adjustable pedal | Pedal operated dry Rockford single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 9.5 gpm · 36.1 L/min | — |
| Rear PTO speeds declared | 558/1116 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,079–4,112 lb · 1,850–1,865 kg | 5,194 lb · 2,356 kg | differs |
| Maximum permissible mass declared | 5,512 lb · 2,500 kg | — | — |
| Wheelbase declared | 83.4 in · 2,119 mm | 73.5 in · 1,867 mm | +13% EM 300/2 Königstiger |
| Length declared | 127.6 in · 3,240 mm | 117.0 in · 2,972 mm | +9% EM 300/2 Königstiger |
| Width declared | 61.0 in · 1,550 mm | 64.0 in · 1,626 mm | — |
| Ground clearance declared | 15.2 in · 386 mm | 13.0 in · 330 mm | +17% EM 300/2 Königstiger |
| Turning radius, braked declared | 11.0 ft · 3.35 m | 12.0 ft · 3.66 m | +9% International 340 |
| Fuel tank declared | 40.2 qt · 38 L | 61.3 qt · 58.0 L | +53% International 340 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher EM 300/2 Königstiger sources
- Source: Traktorenlexikon, “Eicher EM 300/2 Königstiger”
International Harvester International 340 sources
- Source: Traktorenlexikon, “IHC 340”
- Source: Traktorenlexikon, “IHC International 330”