6 material differences · fewer than 12

8121951–1957No measured PTO figure

Which should you choose?

Read our verdict on the ED 16/I and the Pony 811/812 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 2 fields identical or within 5%, which is not counted as material

Eicher ED 16/I and MASSEY-HARRIS Pony 811/812, field by field
Field	ED 16/I	Pony 811/812	Gap
Engine
Engine power, claimed claimed	15.7 hp	15.6 hp	—
Engine declared	—	SIMCA 702	—
Transmission
Top speed declared	9.3 mph · 15 km/h	10.6 mph · 17 km/h	+13% Pony 811/812
Clutch declared	Single-plate dry clutch	Pedal operated dry single plate clutch	differs
Hydraulics & hitch
Pump flow declared	—	2.5 gpm · 9.5 L/min	—
Rear PTO speeds declared	540 rpm	534 rpm	differs
Weight & dimensions
Unladen weight declared	3,197 lb · 1,450 kg	1,889 lb · 857 kg	+69% ED 16/I
Wheelbase declared	59.8 in · 1,520 mm	66.0 in · 1,676 mm	+10% Pony 811/812
Length declared	95.3 in · 2,420 mm	99.2 in · 2,520 mm	—
Width declared	59.1 in · 1,500 mm	56.0–80.0 in · 1,422–2,032 mm	differs
Ground clearance declared	—	21.3 in · 540 mm	—
Fuel tank declared	—	31.7 qt · 30.0 L	—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Eicher ED 16/I sources

Source

Source: Traktorenlexikon, “Eicher ED 16/I”

MASSEY-HARRIS Pony 811/812 sources