7 material differences · fewer than 12
Tractor oneEicher 680 PAB1986–1991No measured PTO figureTractor twoLandini 8560 L (DT) TL 40 N/M (TL-40 DT/M)1988–2000No measured PTO figure
Which should you choose?
Read our verdict on the 680 PAB and the 8560 L (DT) TL 40 N/M (TL-40 DT/M) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 680 PAB | 8560 L (DT) TL 40 N/M (TL-40 DT/M) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 79 hp | 78.9 hp | — |
| Engine declared | — | Perkins A 4.248 | — |
| Displacement declared | — | 4.07 L | — |
| Maximum torque declared | — | 208 lb·ft · 282 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Dry and air-cooled OMG double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 11.6 gpm · 44 L/min | 11.2 gpm · 42.3 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | 2,756 psi · 190 bar | +9% 8560 L (DT) TL 40 N/M (TL-40 DT/M) |
| Rear PTO speeds declared | 540 rpm / 750 rpm / 1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,228 lb · 2,825 kg | 5,027 lb · 2,280 kg | +24% 680 PAB |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 89.6 in · 2,275 mm | 81.5 in · 2,070 mm | +10% 680 PAB |
| Length declared | 131.3 in · 3,335 mm | 140.6 in · 3,570 mm | +7% 8560 L (DT) TL 40 N/M (TL-40 DT/M) |
| Width declared | 52.8 in · 1,341 mm | 61.4–89.4 in · 1,560–2,270 mm | differs |
| Ground clearance declared | 15.4 in · 390 mm | 16.5 in · 420 mm | +8% 8560 L (DT) TL 40 N/M (TL-40 DT/M) |
| Turning radius, braked declared | — | 10.9 ft · 3.33 m | — |
| Fuel tank declared | — | 65.5 qt · 62.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher 680 PAB sources
- Source: Traktorenlexikon, “Eicher 680 PAB”
Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) sources
- Source: Traktorenlexikon, “Landini R 8560 L (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 178”