Eicher 635 K vs SAME 35 DT

12 material differences

Tractor one

1986–1993

No measured PTO figure

Tractor two

1992–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 635 K and the 35 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Eicher 635 K and SAME 35 DT, field by field
Field	635 K	35 DT	Gap
Engine
Engine power, claimed claimed	35 hp	34.5 hp	—
Engine declared	Eicher EDL 2 - 1	MITSUBISHI K4 F-D	differs
Displacement declared	1.96 L	1.49 L	+32% 635 K
Maximum torque declared	97 lb·ft · 132 N·m	63 lb·ft · 84.9 N·m	+55% 635 K
Transmission
Top speed declared	15.8 mph · 25.4 km/h	15.5 mph · 25 km/h	—
Clutch declared	—	Pedal operated dry single-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	11.6 gpm · 44.0 L/min	7.9 gpm · 30.0 L/min	+47% 635 K
Pressure declared	—	1,305 psi · 90 bar	—
Three-point lift at ends declared	—	2,646 lb · 1,200 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	3,329 lb · 1,510 kg	2,513 lb · 1,140 kg	+32% 635 K
Maximum permissible mass declared	—	5,291 lb · 2,400 kg	—
Wheelbase declared	65.6 in · 1,665 mm	64.2 in · 1,630 mm	—
Length declared	98.2 in · 2,495 mm	116.5 in · 2,960 mm	+19% 35 DT
Width declared	35.6–45.3 in · 905–1,150 mm	48.8 in · 1,240 mm	differs
Height declared	75.6–78.7 in · 1,920–2,000 mm	80.1 in · 2,035 mm	differs
Ground clearance declared	10.2 in · 260 mm	13.6 in · 345 mm	+33% 35 DT
Turning radius, braked declared	8.2 ft · 2.50 m	8.9 ft · 2.71 m	+8% 35 DT
Fuel tank declared	52.8 qt · 50 L	30.6 qt · 29.0 L	+72% 635 K

Source

Source