8 material differences · fewer than 12
Tractor oneEicher Mammut 33541974–1978No measured PTO figureTractor twoLeyland 3841969–1972No measured PTO figure
Which should you choose?
Read our verdict on the Mammut 3354 and the 384 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Mammut 3354 | 384 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 54.0 hp | 70.0 hp | +30% 384 |
| Engine declared | Perkins AD 4.203 | LEYLAND-MOTORS 38 TD | differs |
| Displacement declared | 3.34 L | 3.77 L | +13% 384 |
| Maximum torque declared | 162 lb·ft · 220 N·m | 174 lb·ft · 236 N·m | +7% 384 |
| Transmission | |||
| Top speed declared | 14.9 mph · 24 km/h | 18.6 mph · 30 km/h | +25% 384 |
| Clutch declared | — | Dry BORG & BECK double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.0 gpm · 19.0 L/min | 7.9 gpm · 30.0 L/min | +58% 384 |
| Pressure declared | 2,987 psi · 206 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,842 lb · 2,650 kg | 4,718 lb · 2,140 kg | +24% Mammut 3354 |
| Wheelbase declared | 84.4 in · 2,145 mm | 80.0 in · 2,032 mm | +6% Mammut 3354 |
| Length declared | 132.7 in · 3,370 mm | 134.0 in · 3,404 mm | — |
| Width declared | 72.8 in · 1,850 mm | 68.6 in · 1,742 mm | +6% Mammut 3354 |
| Ground clearance declared | — | 18.2 in · 462 mm | — |
| Turning radius, braked declared | — | 11.3 ft · 3.43 m | — |
| Fuel tank declared | 71.9 qt · 68 L | 71.9 qt · 68.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher Mammut 3354 sources
- Source: Traktorenlexikon, “Eicher 3354 Mammut 74 A”
Leyland 384 sources
- Source: Traktorenlexikon, “Leyland 384”