10 material differences · fewer than 12
Tractor oneEicher 31331977–1982No measured PTO figureTractor twoFord 90001969–1972No measured PTO figure
Which should you choose?
Read our verdict on the 3133 and the 9000 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 3133 | 9000 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 131 hp | 145.0 hp | +10% 9000 |
| Engine declared | Eicher EDK 6-5 | Ford 401 | differs |
| Displacement declared | 5.89 L | 6.58 L | +12% 9000 |
| Maximum torque declared | 332 lb·ft · 450 N·m | 372 lb·ft · 504 N·m | +12% 9000 |
| Transmission | |||
| Top speed declared | 19.6 mph · 31.5 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | F&S single dry clutch for driving clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 11.1 gpm · 42.0 L/min | 16.0 gpm · 60.6 L/min | +44% 9000 |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,236 lb · 5,550 kg | 9,800 lb · 4,445 kg | +25% 3133 |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | — | — |
| Wheelbase declared | 107.5 in · 2,730 mm | 91.5 in · 2,324 mm | +17% 3133 |
| Length declared | 181.5 in · 4,610 mm | 151.0 in · 3,835 mm | +20% 3133 |
| Width declared | 91.7 in · 2,330 mm | 91.1 in · 2,314 mm | — |
| Ground clearance declared | 16.9 in · 430 mm | 25.3 in · 643 mm | +50% 9000 |
| Turning radius, braked declared | 17.7 ft · 5.40 m | 11.0 ft · 3.35 m | +61% 3133 |
| Fuel tank declared | — | 172.0 qt · 162.8 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher 3133 sources
Source
- Source: Traktorenlexikon, “Eicher 3133”
Ford 9000 sources
Source
- Source: Traktorenlexikon, “Ford 9000”
- Source: Traktorenlexikon, “Ford 8730”