Eicher Mammut 3020 HR A vs Fahr D 540

12 material differences

Tractor one

1970–1972

No measured PTO figure

Tractor two

1955–1958

No measured PTO figure

Which should you choose?

Read our verdict on the Mammut 3020 HR A and the D 540 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Eicher Mammut 3020 HR A and Fahr D 540, field by field
Field	Mammut 3020 HR A	D 540	Gap
Engine
Engine power, claimed claimed	60.9 hp	58.9 hp	—
Engine declared	Eicher EDK 4	KHD F4L 514	differs
Displacement declared	3.93 L	5.32 L	+35% D 540
Maximum torque declared	183 lb·ft · 248 N·m	201 lb·ft · 273 N·m	+10% D 540
Transmission
Top speed declared	15.5 mph · 25 km/h	19.9 mph · 32 km/h	+28% D 540
Clutch declared	Foot-operated single-plate dry clutch in flywheel housing as PTO clutch	—	—
Hydraulics & hitch
Pump flow declared	10.3 gpm · 39 L/min	4.9 gpm · 18.5 L/min	+111% Mammut 3020 HR A
Pressure declared	2,489 psi · 172 bar	—	—
Three-point lift at ends declared	5,952 lb · 2,700 kg	—	—
Rear PTO speeds declared	590/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,757 lb · 3,065 kg	7,341 lb · 3,330 kg	+9% D 540
Maximum permissible mass declared	9,480 lb · 4,300 kg	9,039 lb · 4,100 kg	—
Wheelbase declared	—	90.6 in · 2,300 mm	—
Length declared	141.7 in · 3,600 mm	153.1 in · 3,890 mm	+8% D 540
Width declared	77.6 in · 1,970 mm	78.2 in · 1,987 mm	—
Height declared	66.9 in · 1,700 mm	91.5 in · 2,324 mm	+37% D 540
Ground clearance declared	11.0 in · 280 mm	16.5 in · 420 mm	+50% D 540
Turning radius, braked declared	15.7 ft · 4.80 m	12.3 ft · 3.75 m	+28% Mammut 3020 HR A
Fuel tank declared	100.4 qt · 95 L	95.1 qt · 90 L	+6% Mammut 3020 HR A

Source

Source