7 material differences · fewer than 12

Tractor oneDeutz (KHD) MTZ 3201932–1936No measured PTO figureTractor twoHanomag RD 361931–1936No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (46%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

7 material differences · 1 fields identical or within 5%, which is not counted as material

Deutz (KHD) MTZ 320 and Hanomag RD 36, field by field
FieldMTZ 320RD 36Gap
Engine
Engine power, claimed claimed35.4 hp35.4 hp—
Engine declared—Hanomag D 52—
Displacement declared—5.20 L—
Transmission
Top speed declared11.3 mph · 18.2 km/h5.0–15.5 mph · 8–25 km/hdiffers
Clutch declared—Single-plate dry clutch—
Weight & dimensions
Unladen weight declared8,863 lb · 4,020 kg6,063–8,378 lb · 2,750–3,800 kgdiffers
Wheelbase declared70.1 in · 1,780 mm78.3 in · 1,990 mm+12% RD 36
Length declared116.1 in · 2,950 mm134.6–140.6 in · 3,420–3,570 mmdiffers
Width declared72.4 in · 1,840 mm68.9–83.5 in · 1,750–2,122 mmdiffers
Ground clearance declared13.8 in · 350 mm10.2–11.0 in · 260–280 mmdiffers
Fuel tank declared52.8 qt · 50 L88.8 qt · 84 L+68% RD 36

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz (KHD) MTZ 320 sources

Source
  • Source: Traktorenlexikon, “Deutz MTZ 320”

Hanomag RD 36 sources

Source
  • Source: Traktorenlexikon, “Hanomag RD 36”
  • Source: Traktorenlexikon, “Hanomag R 40 A”