6 material differences · fewer than 12
Tractor oneDeutz (KHD) MTZ 2201929–1932No measured PTO figureTractor twoKramer K 301941–1942No measured PTO figure
Which should you choose?
Read our verdict on the MTZ 220 and the K 30 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | MTZ 220 | K 30 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 30 hp | 30 hp | — |
| Engine declared | — | Güldner 2 E | — |
| Displacement declared | — | 2.20 L | — |
| Transmission | |||
| Top speed declared | 10.9 mph · 17.5 km/h | 9.3 mph · 15 km/h | +17% MTZ 220 |
| Clutch declared | Pedal operated cone friction clutch | Single-plate clutch by Fichtel & Sachs, type K-16 Z | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | — | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,496 lb · 3,400 kg | 4,409 lb · 2,000 kg | +70% MTZ 220 |
| Wheelbase declared | 70.1 in · 1,780 mm | 76.8 in · 1,950 mm | +10% K 30 |
| Length declared | 121.1 in · 3,075 mm | 120.3 in · 3,055 mm | — |
| Width declared | 70.9 in · 1,800 mm | 63.0 in · 1,600 mm | +13% MTZ 220 |
| Ground clearance declared | 11.8 in · 300 mm | 13.8 in · 350 mm | +17% K 30 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) MTZ 220 sources
- Source: Traktorenlexikon, “Deutz MTZ 220”
Kramer K 30 sources
- Source: Traktorenlexikon, “Kramer K 30 D”