7 material differences · fewer than 12
Tractor oneDeutz (KHD) Intrac 20021972–1974No measured PTO figureTractor twoLandini R-5500 (DT) "TL 22 N/A"1973–1983No measured PTO figure
Which should you choose?
Read our verdict on the Intrac 2002 and the R-5500 (DT) "TL 22 N/A" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | Intrac 2002 | R-5500 (DT) "TL 22 N/A" | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 50.0 hp | 49.3 hp | — |
| Engine declared | KHD F3L 912 H | Perkins AD 3.152 S | differs |
| Displacement declared | 2.83 L | 2.50 L | +13% Intrac 2002 |
| Maximum torque declared | 135 lb·ft · 182 N·m | 128 lb·ft · 173 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Independent dry double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 7.6 gpm · 28.6 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Three-point lift, at the coupling points declared | 4,630 lb · 2,100 kg | 4,519 lb · 2,050 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,908 lb · 2,680 kg | 4,431 lb · 2,010 kg | +33% Intrac 2002 |
| Wheelbase declared | 84.6 in · 2,150 mm | 81.9 in · 2,080 mm | — |
| Length declared | 137.8 in · 3,500 mm | 138.6 in · 3,520 mm | — |
| Width declared | 74.4 in · 1,890 mm | 69.3–89.0 in · 1,760–2,260 mm | differs |
| Ground clearance declared | 17.9 in · 455 mm | 16.5 in · 420 mm | +8% Intrac 2002 |
| Turning radius, braked declared | 12.1 ft · 3.70 m | 10.9 ft · 3.31 m | +12% Intrac 2002 |
| Fuel tank declared | 91.9 qt · 87 L | 64.5 qt · 61.0 L | +43% Intrac 2002 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) Intrac 2002 sources
- Source: Traktorenlexikon, “Deutz INTRAC 2002”
Landini R-5500 (DT) "TL 22 N/A" sources
- Source: Traktorenlexikon, “Landini 5500”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”