Deutz (KHD) Intrac 2002 vs International Harvester 454

9 material differences · fewer than 12

Tractor one

1972–1974

No measured PTO figure

Tractor two

1970–1973

No measured PTO figure

Which should you choose?

Read our verdict on the Intrac 2002 and the 454 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz (KHD) Intrac 2002 and International Harvester 454, field by field
Field	Intrac 2002	454	Gap
Engine
Engine power, claimed claimed	50.0 hp	49.3 hp	—
Engine declared	KHD F3L 912 H	INTERNATIONAL-HARVESTER D-179	differs
Displacement declared	2.83 L	2.93 L	—
Maximum torque declared	135 lb·ft · 182 N·m	131 lb·ft · 178 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	19.9 mph · 32 km/h	+28% 454
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Pump flow declared	—	11.4–12.6 gpm · 43.1–47.7 L/min	—
Pressure declared	2,538 psi · 175 bar	—	—
Three-point lift at ends declared	4,630 lb · 2,100 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,908 lb · 2,680 kg	4,720 lb · 2,141 kg	+25% Intrac 2002
Wheelbase declared	84.6 in · 2,150 mm	75.2 in · 1,910 mm	+13% Intrac 2002
Length declared	137.8 in · 3,500 mm	133.0 in · 3,378 mm	—
Width declared	74.4 in · 1,890 mm	66.0 in · 1,676 mm	+13% Intrac 2002
Height declared	98.4 in · 2,500 mm	55.0 in · 1,397 mm	+79% Intrac 2002
Ground clearance declared	17.9 in · 455 mm	10.0 in · 254 mm	+79% Intrac 2002
Turning radius, braked declared	12.1 ft · 3.70 m	9.2 ft · 2.79 m	+33% Intrac 2002
Fuel tank declared	91.9 qt · 87 L	74.0 qt · 70.0 L	+24% Intrac 2002

Source

Source