Deutz-Fahr DX 92 vs SAME Explorer 90 (DT)

8 material differences · fewer than 12

Tractor one

1982–1983

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the DX 92 and the Explorer 90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 92 and SAME Explorer 90 (DT), field by field
Field	DX 92	Explorer 90 (DT)	Gap
Engine
Engine power, claimed claimed	89 hp	88.8 hp	—
Engine declared	KHD BF4L 913	SAME 1000.4 A Turbo	differs
Displacement declared	4.09 L	4.00 L	—
Maximum torque declared	235 lb·ft · 318 N·m	224 lb·ft · 304 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	Pedal operated dry SAME single disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	12.8 gpm · 48.6 L/min	9.5 gpm · 35.8 L/min	+36% DX 92
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,477 lb · 3,845 kg	6,614 lb · 3,000 kg	+28% DX 92
Maximum permissible mass declared	13,669 lb · 6,200 kg	—	—
Wheelbase declared	91.7 in · 2,330 mm	95.1 in · 2,415 mm	—
Length declared	159.1 in · 4,040 mm	145.2 in · 3,687 mm	+10% DX 92
Width declared	90.7 in · 2,304 mm	73.6 in · 1,870 mm	+23% DX 92
Height declared	106.3 in · 2,700 mm	102.1 in · 2,593 mm	—
Ground clearance declared	23.2 in · 590 mm	20.5 in · 520 mm	+13% DX 92
Turning radius, braked declared	—	9.6 ft · 2.94 m	—
Fuel tank declared	126.8 qt · 120 L	116.2 qt · 110.0 L	+9% DX 92

Source

Source