Deutz-Fahr DX 86 vs SAME Panter (DT)
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the DX 86 and the Panter (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | DX 86 | Panter (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80 hp | 82 hp | — |
| Engine declared | KHD BF4L 913 T | SAME DA 985 P | differs |
| Displacement declared | 4.09 L | 4.52 L | +11% Panter (DT) |
| Maximum torque declared | 211 lb·ft · 286 N·m | 203 lb·ft · 275 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5 mph · 25 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 10.5 gpm · 39.6 L/min | 8.4 gpm · 31.7 L/min | +25% DX 86 |
| Three-point lift at ends declared | 8,378 lb · 3,800 kg | 6,338 lb · 2,875 kg | +32% DX 86 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,091 lb · 3,670 kg | 7,033 lb · 3,190 kg | +15% DX 86 |
| Wheelbase declared | 91.7 in · 2,330 mm | 98.4 in · 2,499 mm | +7% Panter (DT) |
| Length declared | 159.1 in · 4,040 mm | 161.4 in · 4,100 mm | — |
| Width declared | 90.6 in · 2,300 mm | 76.0 in · 1,930 mm | +19% DX 86 |
| Height declared | 105.1 in · 2,670 mm | 103.5 in · 2,630 mm | — |
| Ground clearance declared | 20.9 in · 530 mm | 23.6 in · 600 mm | +13% Panter (DT) |
| Turning radius, braked declared | — | 10.8 ft · 3.30 m | — |
| Fuel tank declared | 126.8 qt · 120 L | 95.1 qt · 90.0 L | +33% DX 86 |
Deutz-Fahr DX 86 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 86”
- Source: Traktorenlexikon, “Deutz-Fahr DX 4.50”
SAME Panter (DT) sources
Source
- Source: Traktorenlexikon, “SAME Panther”