Deutz-Fahr DX 86 vs Hürlimann H-481 XF

11 material differences · fewer than 12

Tractor one

1982–1983

No measured PTO figure

Tractor two

1992–2000

No measured PTO figure

Which should you choose?

Read our verdict on the DX 86 and the H-481 XF → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 86 and Hürlimann H-481 XF, field by field
Field	DX 86	H-481 XF	Gap
Engine
Engine power, claimed claimed	80 hp	79.0 hp	—
Engine declared	KHD BF4L 913 T	Hürlimann 1000.4 W-3	differs
Displacement declared	4.09 L	4.00 L	—
Maximum torque declared	211 lb·ft · 286 N·m	190 lb·ft · 258 N·m	+11% DX 86
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal-operated dry SLH single-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	10.5 gpm · 39.6 L/min	7.1 gpm · 27.0 L/min	+47% DX 86
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,091 lb · 3,670 kg	5,952 lb · 2,700 kg	+36% DX 86
Wheelbase declared	91.7 in · 2,330 mm	82.0 in · 2,082 mm	+12% DX 86
Length declared	159.1 in · 4,040 mm	149.5 in · 3,797 mm	+6% DX 86
Width declared	90.6 in · 2,300 mm	61.4 in · 1,560 mm	+47% DX 86
Height declared	105.1 in · 2,670 mm	95.7 in · 2,430 mm	+10% DX 86
Ground clearance declared	20.9 in · 530 mm	13.8 in · 350 mm	+51% DX 86
Turning radius, braked declared	—	12.7 ft · 3.86 m	—
Fuel tank declared	126.8 qt · 120 L	74.0 qt · 70.0 L	+71% DX 86

Source

Source