Deutz-Fahr DX 80 vs Massey Ferguson MF 3055 (A)
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the DX 80 and the MF 3055 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | DX 80 | MF 3055 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74 hp | 74 hp | — |
| Engine declared | KHD F4L 913 | Perkins A 4.248 | differs |
| Displacement declared | 4.09 L | 4.07 L | — |
| Maximum torque declared | 196 lb·ft · 266 N·m | 209 lb·ft · 283 N·m | +6% MF 3055 (A) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | — | 13.2 gpm · 50.0 L/min | — |
| Pressure declared | 1,740 psi · 120 bar | — | — |
| Three-point lift at ends declared | 8,378 lb · 3,800 kg | 8,940 lb · 4,055 kg | +7% MF 3055 (A) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,937 lb · 3,600 kg | 8,598 lb · 3,900 kg | +8% MF 3055 (A) |
| Wheelbase declared | 91.7 in · 2,330 mm | 93.3 in · 2,371 mm | — |
| Length declared | 159.1 in · 4,040 mm | 160.2 in · 4,070 mm | — |
| Width declared | 90.6 in · 2,300 mm | 80.7 in · 2,049 mm | +12% DX 80 |
| Height declared | 102.8 in · 2,610 mm | 105.1 in · 2,670 mm | — |
| Ground clearance declared | 23.2 in · 590 mm | 14.6 in · 370 mm | +59% DX 80 |
| Fuel tank declared | 126.8 qt · 120 L | 156.4 qt · 148.0 L | +23% MF 3055 (A) |
Deutz-Fahr DX 80 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 80”
- Source: Traktorenlexikon, “Deutz-Fahr DX 3.90”
Massey Ferguson MF 3055 (A) sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 3055”
- Source: Traktorenlexikon, “Massey Ferguson MF 178”