Deutz-Fahr DX 80 vs Fendt Farmer 108 LS/LSA

9 material differences · fewer than 12

Tractor one

1982–1983

No measured PTO figure

Tractor two

1977–1980

No measured PTO figure

Which should you choose?

Read our verdict on the DX 80 and the Farmer 108 LS/LSA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 80 and Fendt Farmer 108 LS/LSA, field by field
Field	DX 80	Farmer 108 LS/LSA	Gap
Engine
Engine power, claimed claimed	74 hp	74 hp	—
Engine declared	KHD F4L 913	MWM D 226-4.2	differs
Displacement declared	4.09 L	4.15 L	—
Maximum torque declared	196 lb·ft · 266 N·m	199 lb·ft · 270 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pressure declared	1,740 psi · 120 bar	2,538 psi · 175 bar	+46% Farmer 108 LS/LSA
Three-point lift at ends declared	8,378 lb · 3,800 kg	7,452 lb · 3,380 kg	+12% DX 80
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	7,937 lb · 3,600 kg	6,856 lb · 3,110 kg	+16% DX 80
Wheelbase declared	91.7 in · 2,330 mm	88.4 in · 2,246 mm	—
Length declared	159.1 in · 4,040 mm	154.6 in · 3,927 mm	—
Width declared	90.6 in · 2,300 mm	83.5 in · 2,121 mm	+8% DX 80
Height declared	102.8 in · 2,610 mm	97.0 in · 2,464 mm	+6% DX 80
Ground clearance declared	23.2 in · 590 mm	16.5 in · 420 mm	+40% DX 80
Fuel tank declared	126.8 qt · 120 L	91.9–98.3 qt · 87–93 L	differs

Source

Source