12 material differences
Tractor oneDeutz-Fahr DX 8.301983–1988No measured PTO figureTractor twoSteyr-Case 9220 a1997–1999No measured PTO figure
Which should you choose?
Read our verdict on the DX 8.30 and the 9220 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | DX 8.30 | 9220 a | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 217 hp | 211.2 hp | — |
| Engine declared | KHD BF6L 413 FR | CASE-IH 6TA-830 | differs |
| Displacement declared | 9.57 L | 8.27 L | +16% DX 8.30 |
| Maximum torque declared | 597 lb·ft · 810 N·m | 667 lb·ft · 904 N·m | +12% 9220 a |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal operated wet ZF multi-disc clutch with oil-hydraulic Voith turbo coupling | Pedal-operated hydraulic wet multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 21.4 gpm · 81 L/min | 29.7 gpm · 112.4 L/min | +39% 9220 a |
| Pressure declared | — | 2,944 psi · 203 bar | — |
| Rear PTO speeds declared | 1084 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 20,393 lb · 9,250 kg | 17,864 lb · 8,103 kg | +14% DX 8.30 |
| Maximum permissible mass declared | 26,455 lb · 12,000 kg | 25,519 lb · 11,575 kg | — |
| Wheelbase declared | 118.6 in · 3,012 mm | 118.3 in · 3,006 mm | — |
| Length declared | 213.7 in · 5,427 mm | 200.1 in · 5,083 mm | +7% DX 8.30 |
| Width declared | 98.4 in · 2,500 mm | 120.0–153.1 in · 3,048–3,890 mm | differs |
| Ground clearance declared | 22.6 in · 575 mm | 17.3 in · 439 mm | +31% DX 8.30 |
| Fuel tank declared | 422.7 qt · 400 L | 379.4 qt · 359.0 L | +11% DX 8.30 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr DX 8.30 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 8.30”
- Source: Traktorenlexikon, “Deutz-Fahr DX 230”
Steyr-Case 9220 a sources
Source
- Source: Traktorenlexikon, “Steyr 9220 a”