8 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 7.10 A1984–1989No measured PTO figureTractor twoSAME Titan 1601991–1998No measured PTO figure

Which should you choose?

Read our verdict on the DX 7.10 A and the Titan 160 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 7.10 A and SAME Titan 160, field by field
Field	DX 7.10 A	Titan 160	Gap
Engine
Engine power, claimed claimed	157.0 hp	156.8 hp	—
Engine declared	KHD BF6L 913.118/2	SAME 1000.6 ATI	differs
Displacement declared	6.13 L	6.00 L	—
Maximum torque declared	415 lb·ft · 563 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry two-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	16.2 gpm · 61.2 L/min	15.2 gpm · 57.5 L/min	+6% DX 7.10 A
Pressure declared	3,481 psi · 240 bar	—	—
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,206 lb · 5,990 kg	13,569–14,264 lb · 6,155–6,470 kg	differs
Maximum permissible mass declared	18,739 lb · 8,500 kg	18,739 lb · 8,500 kg	—
Wheelbase declared	111.3 in · 2,826 mm	112.2 in · 2,850 mm	—
Length declared	187.8 in · 4,770 mm	187.0 in · 4,750 mm	—
Width declared	93.3 in · 2,370 mm	97.2 in · 2,470 mm	—
Height, over the cab declared	107.5 in · 2,730 mm	113.8 in · 2,890 mm	+6% Titan 160
Ground clearance declared	19.3 in · 490 mm	20.3 in · 515 mm	—
Turning radius, braked declared	22.0 ft · 6.72 m	17.2 ft · 5.25 m	+28% DX 7.10 A
Fuel tank declared	158.5 qt · 150 L	243.0 qt · 230.0 L	+53% Titan 160

Source

Source