11 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 7.10 A1984–1989No measured PTO figureTractor twoSAME Hercules 1601979–1983No measured PTO figure

Which should you choose?

Read our verdict on the DX 7.10 A and the Hercules 160 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 7.10 A and SAME Hercules 160, field by field
Field	DX 7.10 A	Hercules 160	Gap
Engine
Engine power, claimed claimed	157.0 hp	156.8 hp	—
Engine declared	KHD BF6L 913.118/2	SAME DA 1056 P Turbo	differs
Displacement declared	6.13 L	6.23 L	—
Maximum torque declared	415 lb·ft · 563 N·m	426 lb·ft · 578 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Independent dry two-plate clutch	Pedal-operated dry SAME single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	16.2 gpm · 61.2 L/min	15.9 gpm · 60.0 L/min	—
Pressure declared	3,481 psi · 240 bar	2,756 psi · 190 bar	+26% DX 7.10 A
Three-point lift, at the coupling points declared	17,196 lb · 7,800 kg	11,804 lb · 5,354 kg	+46% DX 7.10 A
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,206 lb · 5,990 kg	13,558 lb · 6,150 kg	—
Maximum permissible mass declared	18,739 lb · 8,500 kg	—	—
Wheelbase declared	111.3 in · 2,826 mm	112.5 in · 2,857 mm	—
Length declared	187.8 in · 4,770 mm	184.3 in · 4,680 mm	—
Width declared	93.3 in · 2,370 mm	94.5–110.2 in · 2,400–2,800 mm	differs
Height, over the cab declared	107.5 in · 2,730 mm	113.4 in · 2,880 mm	+5% Hercules 160
Ground clearance declared	19.3 in · 490 mm	21.7 in · 550 mm	+12% Hercules 160
Turning radius, braked declared	22.0 ft · 6.72 m	17.1 ft · 5.20 m	+29% DX 7.10 A
Fuel tank declared	158.5 qt · 150 L	253.6 qt · 240.0 L	+60% Hercules 160

Source

Source