8 material differences · fewer than 12
Tractor oneDeutz-Fahr DX 6.50 A1983–1990No measured PTO figureTractor twoWHITE 2-1351976–1982No measured PTO figure
Which should you choose?
Read our verdict on the DX 6.50 A and the 2-135 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | DX 6.50 A | 2-135 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 135.2 hp | 135.2 hp | — |
| Engine declared | KHD BF6L 913.101T | — | — |
| Displacement declared | 6.13 L | — | — |
| Maximum torque declared | 375 lb·ft · 508 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | 15.2 gpm · 57.6 L/min | — | — |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,081 lb · 5,480 kg | 14,182 lb · 6,433 kg | +17% 2-135 |
| Maximum permissible mass declared | 17,637 lb · 8,000 kg | — | — |
| Wheelbase declared | 106.4 in · 2,703 mm | 113.0 in · 2,870 mm | +6% 2-135 |
| Length declared | 179.5 in · 4,560 mm | 168.0 in · 4,267 mm | +7% DX 6.50 A |
| Width declared | 93.3 in · 2,370 mm | 96.0 in · 2,438 mm | — |
| Height, over the cab declared | 109.6 in · 2,785 mm | 117.0 in · 2,972 mm | +7% 2-135 |
| Ground clearance declared | 22.4 in · 570 mm | 22.0 in · 559 mm | — |
| Turning radius, braked declared | 17.0 ft · 5.17 m | 12.2 ft · 3.71 m | +39% DX 6.50 A |
| Fuel tank declared | 158.5 qt · 150 L | 295.9 qt · 280.0 L | +87% 2-135 |
Deutz-Fahr DX 6.50 A sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 6.50”
WHITE 2-135 sources
Source
- Source: Traktorenlexikon, “White 2-135”