7 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 6.301983–1990No measured PTO figureTractor twoZETOR 12111/121451984–1990No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.30 and the 12111/12145 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.30 and ZETOR 12111/12145, field by field
Field	DX 6.30	12111/12145	Gap
Engine
Engine power, claimed claimed	113.7 hp	113.5 hp	—
Engine declared	—	ZETOR Z-8701.1	—
Displacement declared	—	6.84 L	—
Maximum torque declared	281 lb·ft · 381 N·m	266 lb·ft · 360 N·m	+6% DX 6.30
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry ZTS single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.0 gpm · 60.4 L/min	12.6 gpm · 47.8 L/min	+26% DX 6.30
Pressure declared	3,481 psi · 240 bar	2,828 psi · 195 bar	+23% DX 6.30
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,670 lb · 4,840 kg	9,692 lb · 4,396 kg	+10% DX 6.30
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	106.4 in · 2,703 mm	106.3 in · 2,700 mm	—
Length declared	179.1 in · 4,550 mm	183.7 in · 4,665 mm	—
Width declared	90.7 in · 2,304 mm	86.2–89.8 in · 2,190–2,280 mm	—
Height, over the cab declared	104.3 in · 2,650 mm	106.1 in · 2,695 mm	—
Ground clearance declared	21.3 in · 540 mm	11.8 in · 300 mm	+80% DX 6.30
Turning radius, braked declared	16.2 ft · 4.94 m	13.8 ft · 4.20 m	+18% DX 6.30
Fuel tank declared	126.8 qt · 120 L	206.1 qt · 195.0 L	+63% 12111/12145

Source

Source