Deutz-Fahr DX 6.30 vs SAME Antares 110

7 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1991–1996

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.30 and the Antares 110 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 9 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.30 and SAME Antares 110, field by field
Field	DX 6.30	Antares 110	Gap
Engine
Engine power, claimed claimed	113.7 hp	108.5 hp	—
Engine declared	—	SAME 1000.6 A	—
Displacement declared	—	6.00 L	—
Maximum torque declared	281 lb·ft · 381 N·m	256 lb·ft · 347 N·m	+10% DX 6.30
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal-operated dry S.L.H. single-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.0 gpm · 60.4 L/min	16.3 gpm · 61.7 L/min	—
Pressure declared	3,481 psi · 240 bar	2,176 psi · 150 bar	+60% DX 6.30
Three-point lift at ends declared	11,464 lb · 5,200 kg	11,442 lb · 5,190 kg	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,670 lb · 4,840 kg	10,703 lb · 4,855 kg	—
Maximum permissible mass declared	14,991 lb · 6,800 kg	16,535 lb · 7,500 kg	+10% Antares 110
Wheelbase declared	106.4 in · 2,703 mm	108.3 in · 2,750 mm	—
Length declared	179.1 in · 4,550 mm	180.7 in · 4,590 mm	—
Width declared	90.7 in · 2,304 mm	87.4 in · 2,220 mm	—
Height declared	104.3 in · 2,650 mm	111.0 in · 2,820 mm	+6% Antares 110
Ground clearance declared	21.3 in · 540 mm	22.2 in · 565 mm	—
Turning radius, braked declared	16.2 ft · 4.94 m	16.8 ft · 5.12 m	—
Fuel tank declared	126.8 qt · 120 L	243.0 qt · 230.0 L	+92% Antares 110

Source

Source