Deutz-Fahr DX 6.30 vs International Harvester Hydro 186

10 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1976–1981

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.30 and the Hydro 186 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.30 and International Harvester Hydro 186, field by field
Field	DX 6.30	Hydro 186	Gap
Engine
Engine power, claimed claimed	113.7 hp	105 hp	+9% DX 6.30
Engine declared	—	INTERNATIONAL HARVESTER D-436	—
Displacement declared	—	7.14 L	—
Maximum torque declared	281 lb·ft · 381 N·m	315 lb·ft · 427 N·m	+12% Hydro 186
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal-operated Dyna-Life clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.0 gpm · 60.4 L/min	—	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	11,464 lb · 5,200 kg	5,853 lb · 2,655 kg	+96% DX 6.30
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,670 lb · 4,840 kg	13,135 lb · 5,958 kg	+23% Hydro 186
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	106.4 in · 2,703 mm	104.8 in · 2,662 mm	—
Length declared	179.1 in · 4,550 mm	167.0 in · 4,242 mm	+7% DX 6.30
Width declared	90.7 in · 2,304 mm	102.0 in · 2,591 mm	+12% Hydro 186
Height declared	104.3 in · 2,650 mm	112.0 in · 2,845 mm	+7% Hydro 186
Ground clearance declared	21.3 in · 540 mm	13.0 in · 330 mm	+64% DX 6.30
Turning radius, braked declared	16.2 ft · 4.94 m	11.7 ft · 3.58 m	+38% DX 6.30
Fuel tank declared	126.8 qt · 120 L	200.0 qt · 189.3 L	+58% Hydro 186

Source

Source