Deutz-Fahr DX 6.30 vs Ford TW-10 (A)

8 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.30 and the TW-10 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.30 and Ford TW-10 (A), field by field
Field	DX 6.30	TW-10 (A)	Gap
Engine
Engine power, claimed claimed	113.7 hp	125.3 hp	+10% TW-10 (A)
Engine declared	—	Ford 401 DF	—
Displacement declared	—	6.58 L	—
Maximum torque declared	281 lb·ft · 381 N·m	333 lb·ft · 452 N·m	+19% TW-10 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	—	Pedal operated dry single plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.0 gpm · 60.4 L/min	15.9 gpm · 60.0 L/min	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	11,464 lb · 5,200 kg	8,113 lb · 3,680 kg	+41% DX 6.30
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,670 lb · 4,840 kg	12,866 lb · 5,836 kg	+21% TW-10 (A)
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	106.4 in · 2,703 mm	109.7 in · 2,786 mm	—
Length declared	179.1 in · 4,550 mm	176.0 in · 4,470 mm	—
Width declared	90.7 in · 2,304 mm	86.6 in · 2,200 mm	—
Height declared	104.3 in · 2,650 mm	116.1 in · 2,950 mm	+11% TW-10 (A)
Ground clearance declared	21.3 in · 540 mm	25.2 in · 640 mm	+19% TW-10 (A)
Turning radius, braked declared	16.2 ft · 4.94 m	13.2 ft · 4.01 m	+23% DX 6.30
Fuel tank declared	126.8 qt · 120 L	211.3 qt · 200.0 L	+67% TW-10 (A)

Source

Source