Deutz-Fahr DX 6.30 vs Fiat F-120 DT

6 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1990–1993

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.30 and the F-120 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 9 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.30 and Fiat F-120 DT, field by field
Field	DX 6.30	F-120 DT	Gap
Engine
Engine power, claimed claimed	113.7 hp	116.4 hp	—
Engine declared	—	FIAT-IVECO 8065.05 B 330	—
Displacement declared	—	5.86 L	—
Maximum torque declared	281 lb·ft · 381 N·m	288 lb·ft · 390 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, hydraulic-dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.0 gpm · 60.4 L/min	14.9 gpm · 56.5 L/min	+7% DX 6.30
Pressure declared	3,481 psi · 240 bar	3,046–3,118 psi · 210–215 bar	differs
Three-point lift at ends declared	11,464 lb · 5,200 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,670 lb · 4,840 kg	11,839 lb · 5,370 kg	+11% F-120 DT
Maximum permissible mass declared	14,991 lb · 6,800 kg	17,857 lb · 8,100 kg	+19% F-120 DT
Wheelbase declared	106.4 in · 2,703 mm	106.0 in · 2,692 mm	—
Length declared	179.1 in · 4,550 mm	185.4 in · 4,710 mm	—
Width declared	90.7 in · 2,304 mm	91.3 in · 2,320 mm	—
Height declared	104.3 in · 2,650 mm	109.4 in · 2,780 mm	—
Ground clearance declared	21.3 in · 540 mm	19.9 in · 505 mm	+7% DX 6.30
Turning radius, braked declared	16.2 ft · 4.94 m	16.3 ft · 4.96 m	—
Fuel tank declared	126.8 qt · 120 L	232.5 qt · 220.0 L	+83% F-120 DT

Source

Source