9 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 6.301983–1990No measured PTO figureTractor twoFiat 115-90 (DT)1984–1990No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.30 and the 115-90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.30 and Fiat 115-90 (DT), field by field
Field	DX 6.30	115-90 (DT)	Gap
Engine
Engine power, claimed claimed	113.7 hp	113.5 hp	—
Engine declared	—	FIAT-IVECO 8065.05.000	—
Displacement declared	—	5.86 L	—
Maximum torque declared	281 lb·ft · 381 N·m	260 lb·ft · 353 N·m	+8% DX 6.30
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry Valeo or LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.0 gpm · 60.4 L/min	14.7 gpm · 55.6 L/min	+9% DX 6.30
Pressure declared	3,481 psi · 240 bar	3,046–3,118 psi · 210–215 bar	differs
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,670 lb · 4,840 kg	10,097 lb · 4,580 kg	+6% DX 6.30
Maximum permissible mass declared	14,991 lb · 6,800 kg	16,535 lb · 7,500 kg	+10% 115-90 (DT)
Wheelbase declared	106.4 in · 2,703 mm	108.3 in · 2,750 mm	—
Length declared	179.1 in · 4,550 mm	180.3 in · 4,580 mm	—
Width declared	90.7 in · 2,304 mm	74.8–105.9 in · 1,900–2,690 mm	differs
Height, over the cab declared	104.3 in · 2,650 mm	108.1 in · 2,745 mm	—
Ground clearance declared	21.3 in · 540 mm	26.4 in · 670 mm	+24% 115-90 (DT)
Turning radius, braked declared	16.2 ft · 4.94 m	12.7 ft · 3.87 m	+28% DX 6.30
Fuel tank declared	126.8 qt · 120 L	190.2 qt · 180.0 L	+50% 115-90 (DT)

Source

Source